Cookie Img Back to top
Home » Products » GAS LIFT EQUIPMENT » PKO GAS LIFT ORIFICE VALVE

PKO GAS LIFT ORIFICE VALVE

PKO GAS LIFT ORIFICE VALVE
PKO GAS LIFT ORIFICE VALVE
Send Inquiry
Product Code : 83
Product Description

Owing to our immense knowledge in this field, we are able to manufacture, export and supply superior quality Pko Gas Lift Orifice Valve. These valves are basically used to control the flow of gas between the casing annulus and the tubing. The valves are precisely designed by our expert engineers using modern tools and technology. Offered Pko Gas Lift Orifice Valve is fitted with a spring controlled check dart, which prevents gas to flow back. We are able to offer the valves in from 1/8" to 3/8" port sizes in 1/16" increments for the different needs of our clients.

Features:

  • Sturdy construction
  • Corrosion resistant
  • Dimensionally accurate
  • Easy to fit


Other details:


DESCRIPTION

 

The  PARVEEN (Model PKO) retrievable single point  injection gas lift orifice valve s are  used for continuous tubing flow gas lift installations.It is used to control the flow of  gas between the casing annulus and the tubing at valve depth. The valve has a check dart controlled by a spring which does not allow the back flow of gas or well fluids. If  the injection gas pressure in casing & tubing annulus at valve depth falls below the fluid tubing pressure, the fluid from tubing will try to flow back through the valve. Reverse flow through the valve is prevented by a check dart in the  valve  body. The check dart is closed by pressure from the tubing and will not allow passage of fluid  until casing pressure is greater or equal than tubing pressure. This valve is available  from 1/8" to 3/8" port  sizes in 1/16" increments.


 


 

The valve can be installed in Parveen TM series Side Pocket Mandrel&have an integral  bottom latch which  locks the valve  in the side pocket mandrel. After locating the valve in the side pocket mandrel, downward jarring  is required which causes the  collet dogs of the latch to engage the lock in the  recess provided at the bottom of the Side Pocket. Upward jarring is required to pull the valve.Upward jarring shears the brass shear pin securing the shear ring to the latch body. During upward pulling of the valve in the side pocket the shoulder on the latch body moves out from behind the  collet dogs.The collet fingers are deflected inward and disengage  from the locking  recess  of  the  mandrel  pocket. Then the valve is removed from the well.

 

 

Injection gas enters thru the external ports of the orifice valve from annulus between casing & tubing. 2 sets of packing located at the top & bottom of external ports on the valve seals across the ports in side pocket mandrel.The injection gas travels through the choke, past the reverse flow check valve and finally into the production conduit.

ENGINEERING DATA FOR PKO GAS LIFT ORIFICE VALVES.

Type

Assly

Number.

Nominal O.D. (Inch)

Latch

Running Tool

Pulling Tool

Mandrel

Series.

o.

Type

Assly No.

Type

Assly N

 

PKO

 

130-30

XX-XXX

-01

 

1

 

Integral

Bottom

 

MR-01

 

10336-01

 

MP

 

11361

 

TMP, KBM, KBMG, KBG.

  


PARVEEN INDUSTRIES PVT LTD
X


Contact Details
PARVEEN INDUSTRIES PVT LTD
465-466-467, EPIP HSIIDC INDL. ESTATE, Sonipat - 131028, Haryana, India
Phone :+918068214194
Mr. Sanjiv Kumar Gupta (Manager)
Mobile :+918068214194
Quick Services
Send SMS Send Inquiry