PARVEEN mud mixing guns are simple in design. All turning takes place on double rows of steel balls in flame hardened races. There is nothing to tighten or adjust. Flow is unrestricted and pressure drop is minimum.

Parveen mud mixing guns are of 3 types:
i)  Spinner Type / Pivot Type.
ii)  Non Spin Type.
iii) Bottom Type.

Parveen spinner/pivot type mud gun is designed for use in tanks where the utmost in constant agitation is desired. The nozzles are set at an angle and the pressure in the line imparts a spinning motion which is accomodated by a style 20 high pressure swivel joints. Furnished in any desired length as spec-ified in order.
Size: 2"
CWP:- 3000 PSI.

Parveen non spin type mud gun is designed for mixing large volume of muds in the top of the tank or pit and also for transferring mud from one tank to another tank. Non spin mud gun can not spin because centrifugal force is neutralized by the offset of the barrel flanges of the gun. Perforated and locking pins locking of gun in any portion.
Size: 2"
CWP:- 3000 PSI.

Parveen bottom type mud gun is designed for use where large size metal tanks are employed as mud pits. It is simple in construction, easy to install and easy to operate.
Size: 2" & 3".
CWP:- 3000 PSI.

Note:
i) Discharge nozzles in all Mud Guns are equipped with tungsten carbide insert.
ii) Other sizes & pressure ratings are also available on request.