Parveen Industries
Home ProductsEngineering, Research & Development NewsletterVisitorsAchievementsAbout Us
Lubricator Accesories


Union Cross Over Adapters can be utilized to provide transition between otherwise incompatible Unions made by the same or different manufacturers. These adapters are designed with a union Box up and Union Pin and Collar down and are always rated, both in term of service and pressure. Any combination of end connections are available upon request.

Floor Black (Hay Pulley) is used to bring the wireline down to a position where it is horizontal from the tree to the wireline reel. It also shifts the point of wireline pull from the top of the lubricator to the base of the tree and reduces side loading of the lubricator.

Specifications

Wireline Clamp is used to clamp the wireline while raising or lowering the lubricator or during fishing operations.

Wellhead Connection is used to connect the bottom of the wireline valve to the top tree connections. The top of the connection fits the bottom of the valve, and the bottom thread of connection is threaded to screw into the particular thread on top of the tree flange connections.

Telescoping Gin Pole is used to raise the lubricator to the top of the wireline valve and maintain this position when breaking-off or making-up wireline tool strings.

Specifications

Load Binder and Chain are used to bind the gin pole to the tree and to the wireline valve.

Rope Blocks are used to raise and lower the lubricator.

Lubricator Pick-Up Clamp used to hook rope block to pick up lubricator.

Pump - In - Subs and Plug Valves are used to pressurize the lubricator during hydrostatic testing or pumping into the well bore when that become necessary during the course of servicing operations. Models with WP. above 5,000 PSI are equipped with specially designed side ports and accept plug valves with integral unions. Plug Valves are avilable seperately and as a component of pump-in-Subs.
Fitted with a variety of Top and Bottom Cconnection, - Quick union connections being most common, - these assemblies are available from 2.50 ID. inch through 6.38" ID. with WP from 3,000 PSI through 15,000 PSI.


Parveen exclusively manufactures Lubricator Accesories in India.

Terms & Conditions | Privacy | Contact Us | Sitemap
Site designed, developed & maintained by www.elagoonsoft.com.