Send SMS
+918068214194
Home » Products » SURFACE PRESSURE CONTROL EQUIPMENT » Lubricator Accessories

Lubricator Accessories

Lubricator Accessories
Lubricator Accessories
Send Inquiry
Product Code : 135
Product Description

Union Cross Over Adapters can be utilized to provide transition between otherwise incompatible unions made by same or different manufacturers. These adapters are designed with a Union Box Up and Union Pin & Collar Down and are always rated, both in terms of service and pressure. Any combination of end connections are available upon request.

 Floor Block (Hay Pulley) is used to bring the wire line down to a position where it is horizontal from the tree to the wire line rig.  It also shifts the point of wire line pull from the top of lubricator to the base of tree and reduces side loading of the lubricator

Engineering Data for Hay Pulley

Pulley Dia (IN)

Groove Dia

Type Connection

Safe Working

Load (lbs)

Part No.

7

Customer to specify

Swivel Hanger

3,000

330700

10

Swivel Hanger

5,000

331000

12

Swivel Hanger

5,000

331200

14

Swivel Hanger

5,000

331400

 

Assembly No.

Description

15XXX00

15XXX10

For all sizes of smooth wireline for

3/16-in and ¼- braided wireline

 


Wireline Clamp is used to clamp the wireline while raising or lowering the lubricator or during fishing operations.

Assembly No.

Description

15XXX00

15XXX10

For all sizes of smooth wireline for

3/16-in and ¼- braided wireline

 Wellhea Connectio is used to connect the bottom of the wireline valve to the top tree connections. The top of the connection fits the bottom of valve and the bottom thread of connection is threaded to screw into the particular threads on top of the tree flange connections. Telescopic Gin Pole is used to rise the lubricator to the top of the wireline valve and maintain this position while breaking off or making up wireline tool string.

Assembly No.

Description

38XXX10

38XXX00

38XXX20

Steel for standard weight lubricators

Aluminium for standard weight lubricators

Steel for standard weight, high-pressure lubricators

 

Load Binder and Chain are used to bind the gin pole to the tree and to the wireline valve.

Rope Blocks are used to raise and lower the lubricator.

Lubricator Pick-Up Clamp is used to hook rope block to pick up lubricator.

Pump - In - Subs and Plug Valves are used to pressurize the lubricator during hydrostatic testing or pumping in to the well bore when that become necessary during the course of servicing operations. Models with WP. above 5,000

PSI are equipped with specially designed side ports and accept plug valves with integral unions. Plug Valves are available separately and as a component of Pump-in-Subs.

Fitted with a variety of Top and Bottom Connection, - Quick Union connections being most common, - these assemblies are available from 2.50 ID. inch through 6.38" ID. with WP from 3,000 PSI through 15,000 PSI.




PARVEEN INDUSTRIES PVT LTD
X


Back to top