The model 'R' nipple is a bottom no go style nipple that provides a tubing lock profile with a honed seal bore to locate wireline flow control devices in tubing string.

Blanking Plugs, chokes, equalizing check valves and instrument hangers which utilize a 'Z' lock may be landed in this type of nipple profile. The no-go shoulder incorporated into the nipple allows positive locating of all flow control equipments used during wireline operations.

Parveen nipple is manufactured from low alloy steel/9 CR -1MO steel with controlled hardness (17-22 HRC) for H2s/Co2 application. It is available upto 15,000 PSI WP.

For Ordering please specify:

- Nipple Model
- Top & Bottom thread connections.
- Packing ID.
- Working pressure & temperature.
- Type of Service.
- Tubing size, weight & Grade.

The model 'F' nipple provides a tubing lock profile with honed unrestricted seal bore to locate wireline flow control devices such as velocity safety valves, blanking plugs chokes, equalizing check valves and instrument hangers.

The number & location of model 'F' nipple should be carefully considered in the complication design stage to allow maximum versality in position of various flow control devices. 'F' Nipple can accept Selective 'S' or Top No-Go 'W' locking devices attached to flow control accessories.

It is manufactured from low alloy steel or 9 CR,1 MO steel with controlled hardness for H₂s/CO₂ service. It is available for pressure upto 15,000 PSI WP.

For Ordering please specify:

- Nipple Model
- Top & Bottom thread connections.
- Packing ID.
- Working pressure & temperature.
- Type of Service.
- Tubing size, weight & Grade.