PARVEEN Conventional Coil Tubing Stripper Packer is available to accomodate tubing sizes 3/4" through 2-3/8".

Features / Advantages of Parveen Coil Tubing Stripper Packer:

1. Adjustable mounting flange, affords a 4-3/4" adjustment within the injector base.
2. The union sub and nut are field interchangeable.
3. Union nut can be 'latched' in up position for full visibility.
4. Unique Spilt Clamp Cap Retainer assists field replacement of Bushing/Packer Insert.
5. Piston 'Close' and 'Open' ports are 1/4" NPT and both located below the Adjustable Mounting Flange.
6. Rod Wiper in Lower Bushing Gland keeps well 'trash' from seal.
7. Piston Wear Ring to protect Piston Housing.
8. Minimal (2-1/8") upward travel of cap-tubing Bushing-Keeper required to disassembled from Packer Housing allowing Split Cap to be located very near Injector Chains for maximum tubing support (Upto 1-1/2" closer than competitors).
9. 1/4" NPT Gage Port provides optional Injection Port.
10. Double acting long stroke piston pushes Energizer/Packer Insert 3/16" beyond half length above Packer Housing for ease of change-out.
11. Packer Inserts and Energizers are interchangeable with competitors. Various materials are available to suit specific well/service conditions.
12. Long wearing bronze Upper and Lower Bushings.
13. Glass - filled teflon Non-Extrusion Ring for added support to packer elements.