Send SMS
+918068214194
Home » Products » WIRELINE TOOLS & ACCESSORIES » ‘TS’ TUBING SWAGE

‘TS’ TUBING SWAGE

‘TS’ TUBING SWAGE
‘TS’ TUBING SWAGE
Send Inquiry
Product Code : 219
Product Description

'TS' TUBING SWAGE

 

PARVEEN Tubing Swages are used to remove large obstructions and restore light collapse in the tubing. This allows smooth running of tool string in well bore. The OD of tubing swage should be equal to tubing drift ID. It should be run with up stroke jar to enable
operator to take it out of tubing if swage is jammed.

 

Engineering Data for Tubing Swage

SIZE (IN)

MAX O.D. (IN)

F/N O.D. (IN)

THREAD CONN.

PIN (IN.-TPI)

PART NO

1.1/2

1.521

1.187

15/16-10 UN

101511

2

1.906

1.375

15/16-10 UN

102021

2.1/2

2.344

1.375

15/16-10 UN

102321

3

2.937

1.750

1.1/16-10 UN

103032

4

3.720

1.750

1.1/16-10 UN

103732

  Other Sizes Available On Request.


 
˜TC TUBING GAUGE / PARAFFIN CUTTER
 
PARVEEN Gauge / Paraffin Cutters are run in hole before running sub surface equipment. Gauge / Paraffin Cutters are used to check if sub surface equipment can pass freely thru tubing & there are no obstructions and to locate top of nipple. The bottom of Gauge / Paraffin Cutter is suitable to cut paraffin , scale and any other obstacles in tubing.
Selection of size :
Example
Nipple bore  = 2.25" No Go ID = 2.197"
So, Gauge Cutter should be between above two sizes.

Engineering Data for Tubing Gauge / Paraffin Cutters

O.D. RANGE (IN) *

F/N O.D.(IN)

THREAD CONN. PIN (IN.-TPI)

PART NO

0.905 - 1.575

0.875

5/8 - 11 UNC

831600

1.655 - 2.265

1.375

15/16 - 10 UN

832231

2.323 - 2.520

1.375

15/16 - 10 UN

832521

2.598 - 2.953

1.750

1.1/16 - 10 UN

832932

2.992 - 3.900

2.312

1.1/16 - 10 UN

833942

5.750 - 6.151

2.312

1.9/16 - 10 UN

836146

*Tubing Gauge / Paraffin Cutter are available in MM. increments within the Specified O.D. Ranges. When ordering , specify required O.D. in MM ( Inches x 25.4 = MM) 




PARVEEN INDUSTRIES PVT LTD
X


Back to top